Name: Ruvati 33-inch Workstation Dual Tier Double Bowl Low Divide Undermount 16 Gauge Stainless Steel Kitchen Sink
Brand: Ruvati
SKU: RVH8255

Question 1

Do you make a colander for the top ledge of this sink?

Accepted Answer

The RVA1367BLK colander can be used on the top ledge. The RVA1288 platform can also be turned to fit on either ledge.

Question 2

Do you make a colander for the top ledge of this sink?

Accepted Answer

The RVA1367BLK colander can be used on the top ledge. The RVA1288 platform can also be turned to fit on either ledge.

Question 3

Is this sink made in other colors?

Accepted Answer

Unfortunately, this model is only made in stainless steel.

Question 4

Does this sink have a low divide?

Accepted Answer

The bowl divider is 6" tall.

Question 5

Do you have a 60/40 workstation with rounded corners?

Accepted Answer

This model is currently not made with rounded corners. The RVH8306 or RVH8305 sinks may work for you.

Question 6

What type or corners? Are they slightly rounded? Do you get a grid for the of each sink?

Accepted Answer

This sink has sharp (zero-radius) corners. The sink spec sheet will list the included and compatible accessories. The RVA68255 rinse grid is sold as a set, so there will be a grid for each side.

Question 7

Is it possible to purchase RVH8255 but with the composite accessories of the wooden ones?

Accepted Answer

Currently, we do not make this model with composite accessories. However, you can purchase the composite accessories separately.  https://www.ruvati.com/collection/accessories/?filter_material=solid-composite

Question 8

I need a smaller width because my cabinet is not quite 33” wide. Any suggestions?

Accepted Answer

The mounting hardware will require approximately 1.5" of space on each side of the sink. We do not manufacture a smaller dual-tier sink. Our 28-inch or 30-inch workstation sinks may work for you.

Question 9

Is the RVH8255 available with the smaller sink on the left hand side?

Accepted Answer

We currently do not manufacture a dual-tier sink with a 40/60 split.

Question 10

How do we install a garbage disposal? What size flange do we buy?

Accepted Answer

You will need a garbage disposal flange.  You can use the garbage disposal flange that comes with your garbage disposal or you can purchase one.  We also manufacture garbage disposal flanges.  It is the RVA1049ST and it comes with a basket similar to the drain.  As long as the garbage disposal flange can accommodate a 3.5" drain opening, any brand should work.

Question 11

In your pictures of this model, you show one rinse grid for a single basin sink, should there be ......

Accepted Answer

The RVH8255 will come with a rinse grid for each side. The rinse grid set model number is RVA68255 and can be purchased from several of our authorized retailers. Please contact our support department if you need assistance locating a retailer. https://www.ruvati.com/contact-us/

Material	Stainless Steel
Installation Type	Under Mount
Width	33"
Front to Back	19"
Bowl Depth	10"
Number of Bowls	1
Sink Thickness	16 Gauge
Collection	Dual Tier
Warranty	Limited Lifetime

Ruvati 33-inch Workstation Dual Tier Double Bowl Low Divide Undermount 16 Gauge Stainless Steel Kitchen Sink

Where to buy

Shoppers also looked at

Worth reading first

From the same collection